- enable
- conf t
- no monitor session 1
- monitor session 1 source interface GigabitEthernet1/48
- monitor session 1 destination interface GigabitEthernet1/41 encapsulation dot1q
- interface GigabitEthernet1/48 (internet connection / port that is being monitored)
- interface GigabitEthernet1/41 (mirror port connected to the monitoring device)
- interface GigabitEthernet1/42 (port for egress vlan 16)
How to create a mirror port on a Cisco switch. Print
Created by: Aaron Allien
Modified on: Thu, Jan 20, 2022 at 9:00 PM
Did you find it helpful? Yes No
Send feedbackSorry we couldn't be helpful. Help us improve this article with your feedback.